|
Post by danturner on Mar 17, 2021 5:37:09 GMT
Just looking for confirmation of the sizes excluded from the CNC kit around the bunk/cabin sides etc.
Am I right in saying I need 8 lengths of 30 x 22 x 1740 and 22 x 22 x 15metres in total for the remaining timber?
Cheers
|
|
|
Post by jimschofield on Mar 17, 2021 21:02:13 GMT
Hi Dan,
I ordered timbers two weeks ago for the decking, cabin and cockpit sides and this was my order.
2 of 300 of 50 x 22,
8 of 200 x 30 x 22
4 of 220 x 22 x 22
4 of 200 x 22 x 22
I have not received it yet but I'll have to scarf the 50 x 22 for the cabin tops.
Hope that helps.
Jim
|
|
|
Post by danturner on Mar 17, 2021 23:22:06 GMT
Thanks Jim,
To confirm are those lengths 2 x 3metres, 8 x 2metres etc?
Regards,
DT
|
|
|
Post by jimschofield on Mar 18, 2021 21:55:15 GMT
Yes Dan, I think they're minimum sizes.
|
|